How To Download And Install iBall Instruments Real-Time Data Viewer (RTDV)
How to Download and Install iBall Instruments Real-Time Data Viewer (RTDV) PREREQUISITES: 1) You need a valid and working Internet connection. Please test this before proceeding. NOTE: If you have just navigated to and are viewing this article, chances are you have a valid and working Internet connection. HOW-TO: 1) Open your browser and go to https://iballinst.com/ […]
How-To (Remotely) Set A New Job Number On The Bloodhound
PREREQUISITES: 1) You need a valid and working Internet connection. Please test this before proceeding. NOTE: If you have just navigated to and are viewing this article, chances are you have a valid and working Internet connection. 2) You need to know the Serial Number (3 or 4 digits) of the Bloodhound Instrument that you have deployed. […]
Troubleshooting a Bloodhound Cellular Connection
Troubleshooting a Bloodhound Cellular Connection or GPRS Modem Problem Sometimes the Cellular Connection that the Bloodhound makes to a digital cell provider can be disrupted by some sitiation or another. This article coveres how to troubleshoot a scenario where your cellular connection has stopped functioning. PREREQUISITES: 1) You need to be on-site with the Bloodhound. […]
What Information Does The Bloodhound Send To WITS?
The packets the Bloodhound sends out to WITS, in order, are: 0140 –Total Gas (if Register 12 is not zero). The Total Gas value sent is divided by the number in Register 26. 1212 – C1 (if Register 68 is 0, sent as Gas Units. If Register 68 is 1, sent as parts per million […]
The 1-2-3 Of Setting Up The Bloodhound On A New Well
How to Ensure Multiple Data Backups – the 1-2-3 of Setting up the Bloodhound on a New Well When you begin a new well with the Bloodhound you may have an entirely new Bloodhound unit, or more likely, one that was deployed on a well prior to this one. This is the checklist of high-level […]
How To (Locally) Re-Zero Total Gas Units On TheBloodhound
Because the Bloodhound operates on a relative gas presence principal, it is possible for the readings on the device to show the presence of gas at a flat rate when there is none. When this condition occurs, a simple re-calibration or “re-zeroing” of the Bloodhound device is in order. PREREQUISITES: To determine if your Bloodhound […]
